Wire Rod Production Process

Production Process of Wire Rod (for drawing material)

Rolling mill for wire rod production line

The wire rods are main materials of various drawing steel products.  Due to the special use of the material,  the purity of the steel shall meet the standard. otherwise there is a possibility of fracture during the drawing process.  For example, the production process of ? 5.5 wire rod of SAE1008 and SAE1045 steel, what method is more proper?

There are two process routes to produce a qualified grade of SAE1008, one route is to adopt the medium frequency furnace + refining furnace. This process has a high demand on the scrap, or it is hard to reach the requirements of the grade. The process investment is lower than EAF process.

The second process option is the use of electric arc furnace,  it process has less limits on the scrap  comparing the IF process. Because the production process of the electric arc furnace requires oxygen blowing, therefore, will increase the oxygen plant on this process route, so total investment of EAF process needs higher investment than the IF process.

#wirerod #highspeedwirerod #IFsteelmaking #EAFsteelmaking #highqualitywirerod #SAE1008wirerod #SAE1045wirerod

Leave A Comment