Energy-Saved Reheating Furnace Tech

Energy-Saved Technology of Reheating Furnace

Rolling steel heating furnace is one of the main energy-consuming equipment in the rolling line, and through the comprehensive use of energy-saving technologies can improve energy utilization and reduce production costs. Step heating furnace can consider the following energy-saving methods.

Air storage combustion technology

The use of air storage combustion technology, each section of the burner can be adjusted individually, heat storage type burners work in pairs, the two alternately change the combustion and smoke exhaust working state. The flue gas discharge temperature can be reduced to below 150 ⊥, and the air can be preheated to above 850 ⊥, which not only improves energy efficiency, but also reduces flue gas emissions.

Inverter

Adopt frequency converter to control the combustion fan of heating furnace, so that the operation can adapt to the change of working condition of heating furnace and reduce the fuel consumption.

Furnace wall material

The heater adopts good performance refractory castable material for the whole castable furnace wall, and adopts composite insulation layer structure to perfect the furnace insulation. The composite furnace wall is divided into 4 layers, and the low cement castables in the working layer have good high temperature resistance, especially in the heating section of the furnace wall, which makes the overall life of the furnace lining greatly improved. The light weight bricks of the secondary working layer have good high temperature insulation performance on the one hand.

Optimize the control of the pressure inside the furnace

Control the pressure distribution in the furnace to strengthen the role of furnace gas circulation and uniform furnace temperature. When the pressure inside the furnace is too high, the high temperature flue gas will escape from the furnace, resulting in heat loss. When the pressure inside the furnace is too low, the furnace mouth and not tight at the inhalation of cold air, resulting in increased heat loss taken away from the furnace flue gas.

Vapor cooling technology

Step heating furnace using forced vapor cooling technology, can be effectively used to recover the heat, reduce the black mark on the heated billet, extend the life of the cooling components in the furnace, so that the furnace operation is more safe and reliable.

Hydraulic potential energy recovery technology

The gravitational potential energy released during the descent of the stepper beam is recovered and released to assist the work of the main lifting cylinder during the rise, which is a significant energy-saving effect.

Leave A Comment